Health and the environment: poor air at work, the real hidden cause?

pollution de l’air intérieur, produits chimiques ou ventilation insuffisante : découvrez les causes cachées qui peuvent nuire à la santé au travail.

Hi, Patrick here. Poor air quality at work can contribute to absences, irritation and reduced alertness: identify the sources, measure exposure and tackle it at the source. In a workshop, dust, fumes, solvents or heat can combine without being visible. Symptoms alone are not enough to identify the cause, but they are a signal that should be checked.

Things to do without delay

  • Note the areas and times when odours, irritation or headaches occur.
  • Collect reports from teams and note short absences, without drawing medical conclusions.
  • Check the maintenance of extraction and ventilation systems.
  • Identify possible sources: welding, dust, cleaning products, paint or combustion engines.
  • Ask a prevention professional to assess exposure.

Indoor air quality should be addressed methodically: identify emissions, check the effectiveness of extraction, then verify the results. For more information, see the INRS guide to indoor air and the results of the OberA survey of working people.

Why poor air quality at work remains a hidden cause

Dashboards often track the number of days of absence, but much less often track exposure by job role. Yet workplace pollution can cause immediate discomfort and, depending on the agents involved and the duration of exposure, contribute to more serious health effects.

An OberA survey of 3,100 working people conducted in February 2026 found that 59% of respondents reported at least one day of absence that they attributed to their working environment. More than half rated the air in their workplace as fair to very poor: these are self-reported perceptions, useful as signals, but they do not replace exposure measurements.

In a hypothetical workshop with 50 people, applying an estimate of 3,500 to 4,000 euros per employee affected by absenteeism represents an estimated 175,000 to 200,000 euros in annual direct costs. The actual amount depends on the calculation method and does not always include delays, replacements or the additional workload on colleagues.

Which invisible pollutants can affect occupational health?

Invisible pollutants vary depending on the activity. Welding fumes, wood dust, solvents, bioaerosols and exhaust gases do not have the same effects or require the same preventive measures.

Activity or areaPossible sourcesWarning signs to take seriously
Welding and metalworkingFumes and process particlesRespiratory irritation, coughing
Woodworking and joineryDust released during cutting or sandingIrritation, breathing difficulties
Painting and plastics processingSolvents and volatile organic compoundsHeadaches, nausea or dizziness
Food processingMicroorganisms and bioaerosols, depending on the processesRespiratory symptoms or allergic reactions
WarehouseEmissions from combustion engines in enclosed spacesFatigue, headaches, irritation

The same discomfort can have several explanations. Recurring respiratory symptoms should be reported to the occupational health service, which can guide the process without mistaking a reported feeling for a diagnosis.

Two situations to distinguish

If symptoms occur mainly near a particular operation, have the source and local extraction checked. If several people experience discomfort in different areas, also examine the general ventilation, the products used and maintenance conditions.

Identify environmental risks and take action in three steps

Short, repeated absences do not prove harmful exposure. But when they are concentrated in an area where teams also report discomfort, the correlation warrants a structured investigation.

  1. Step 1 — Map: note the workstations, processes, products used and times when discomfort is reported. Compare this information with absences by department, while respecting medical confidentiality.
  2. Step 2 — Measure: have the relevant pollutants assessed by a competent person. The results should be interpreted in light of the tasks, exposure durations and applicable reference values.
  3. Step 3 — Correct and check: prioritise reducing emissions at source, followed by extraction and workplace ventilation. Then check that the measures are working and inform the teams.

In a joinery workshop, for example, a visible cloud of dust after sanding led the team to review the extraction directly at the machine. This made the problem tangible: it is better to capture pollution at the workstation than to rely solely on general ventilation.

“What gets measured is easier to improve.” Above all, this saying reminds us that a proper assessment is better than an assumption, especially when several hidden causes are possible.

Prevent occupational diseases without delay

Prevention is based first and foremost on risk assessment and reducing exposure. Employer obligations are set out in particular in the Labour Code; how they apply depends on the agents, activities and premises concerned. If in doubt, check the current requirements with the prevention service, occupational physician or relevant inspectorate.

Solutions should be suited to the process: extraction as close as possible to the source of an emission, filter maintenance, choosing lower-emission products where possible, separating areas or limiting the use of combustion engines indoors. A suitable mask can complement collective prevention, but does not replace control of the source.

Occupational diseases can result from multiple factors and may develop after prolonged exposure. Preventing workplace pollution therefore protects employees, while also reducing the risk of disruption and supporting a sustainable approach to occupational health.

Frequently asked questions about air at work

What signs may point to an air quality problem at work?

Irritation of the eyes or throat, headaches, coughing or breathing difficulties may be signs worth investigating. On their own, they are not enough to identify the cause.

Is an odour enough to prove that the air is dangerous?

No. Some pollutants are odourless, and an odour does not directly indicate the level of exposure. An assessment suited to the processes and products is necessary.

Who can assess air quality in a workshop?

The occupational prevention and health service can guide the process. Measurements can be carried out by competent professionals, depending on the agents being investigated and the workstations concerned.

Is general ventilation enough to protect teams?

Not always. For a localised emission, extraction at source is often the priority, together with properly designed and maintained general ventilation.

Thanks so much for reading; best wishes, Patrick

Leave a Comment

Your email address will not be published. Required fields are marked *